USB iBeacon with external antenna. Supports iBeacon and Eddystone.One of the problems with USB beacons is that the form factor and proximity of the device powering the beacon compromise the antenna de..
Beacon that can be used in many different modes: 1 channel advertising, 2 channels advertising, 1 + 2 advertising and Meeblue fixed data. The two main advertising channels can be iBeacon, Eddystone UI..
USB beacon that can be used in many different modes: The two advertising channels can be iBeacon, Eddystone UID, Eddystone URL or user defined.One of the problems with USB beacons is that the form fac..
USB beacon advertising iBeacon. This beacon also has a CP2104 USB Serial converter that causes the device to show as a serial COM port device. This allows you to control it from other devices such as&..
Long range USB beacon that transmits up to 300m. Sends up to 10 channels simultaneously that can be Eddystone-UID, Eddystone-URL, iBeacon or AltBeacon.Can be powered by desktop/laptop USB, mains USB A..
Specialist, USB powered beacon with a very long 1000m to 4000m range. One of these devices can be used instead of very many less powerful beacons thus saving costs and easing maintenance. Transmits up..
USB beacon with external antenna Beacon that can be set up to advertise iBeacon, Eddystone-UID and Eddystone-URL.One of the problems with USB beacons is that the form factor and proximity of the devic..
USB beacon supporting one of iBeacon, Eddystone-UID, Eddystone-URL at any one time. One of the few USB beacons that support Eddystone.Note that this beacon has special firmware that allows iBeacon/Edd..
Latest V3 version of the Bluefruit LE Friend. USB to BLE beacon for experimentors that can be connected via USB. Use a terminal emulator or other hardware/software to send commands to the beacon for s..
Dual-mode iBeacon, supports Bluetooth 2.0/3.0/2.1 and Bluetooth BLE 4.0 USB beacon advertising iBeacon.Android configuration app (iOS configuration app not supplied).Comes with instructions how to acc..
The ABSniffer 528 scans for Bluetooth devices and sends the data via USB/TTL plugged into a PC, Mac, Linux or Raspberry Pi. It shows up on the Raspberry Pi as /dev/ttyACM0. It communicates with PC thr..